IDA71

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "IDA71" – news · newspapers · books · scholar · JSTOR (September 2009) (Learn how and when to remove this message)

The Soviet, later Russian IDA71 military and naval rebreather is an oxygen rebreather intended for use by naval and military divers including Russian commando frogmen. As supplied it is in a plain backpack harness with no buoyancy aid. The casing is pressed aluminium with a hinged cover. It has a small optional nitrox cylinder which can be clipped on its outside to convert it to nitrox mode. It contains one oxygen cylinder and two absorbent canisters. In the bottom of its casing is an empty space which is intended for an underwater communications set.

Here, "up", "back", etc. refer to a man wearing the set standing on land.

The casing is thinner towards the lower end, to reduce drag.

On the front of the harness of the navy frogman version there is a projecting metal plate intended to carry a limpet mine. The front of the harness is a tough rubber "apron".

The loop of each breathing tube can be strapped down to the shoulder to keep it under control to stop it from catching on things or being easily grabbed from behind.

On each side of the casing is a small clip to fasten a parachute to.