List of 2 ft 3 in gauge railways

Track gauge

By transport mode
Tram Rapid transit Miniature Scale model
By size (list)
Minimum   Minimum   Fifteen inch 381 mm (15 in) Narrow   600 mm Two foot Two foot three inch 600 mm 610 mm 686 mm (1 ft 11+5⁄8 in) (2 ft) (2 ft 3 in)   750 mm Bosnian gauge Two foot six inch 750 mm 760 mm 762 mm (2 ft 5+1⁄2 in) (2 ft 5+15⁄16 in) (2 ft 6 in)   Swedish three foot 900 mm Three foot Italian metre 891 mm 900 mm 914 mm 950 mm (2 ft 11+3⁄32 in) (2 ft 11+7⁄16 in) (3 ft) (3 ft1+13⁄32 in)   Metre 1,000 mm (3 ft 3+3⁄8 in)   Three foot six inch 1,067 mm (3 ft 6 in)   Four foot 1,219 mm (4 ft)   Four foot six inch 1,372 mm (4 ft 6 in)   1432 mm 1,432 mm (4 ft 8+3⁄8 in)   Standard 1,435 mm (4 ft 8+1⁄2 in) Broad   Italian broad gauge Dresden gauge 1,445 mm 1,450 mm (4 ft 8+7⁄8 in) (4 ft 9+3⁄32 in)   Leipzig gauge 1,458 mm (4 ft 9+13⁄32 in)   Toronto gauge 1,495 mm (4 ft 10+7⁄8 in)   1520 mm Five foot 1,520 mm 1,524 mm (4 ft 11+27⁄32 in) (5 ft)   Pennsylvania gauge Pennsylvania gauge Five foot three inch 1,581 mm 1,588 mm 1,600 mm (5 ft 2+1⁄4 in) (5 ft 2+1⁄2 in) (5 ft 3 in)   Baltimore gauge 1,638 mm (5 ft 4+1⁄2 in)   Iberian gauge Five foot six inch 1,668 mm 1,676 mm (5 ft 5+21⁄32 in) (5 ft 6 in)   Six foot 1,829 mm (6 ft)   Brunel 2,140 mm (7 ft 1⁄4 in)
Change of gauge
Break-of-gauge Dual gauge Conversion list Bogie exchange Variable gauge
By location
North America South America Europe Australia

In railway terminology, track gauge indicates the distance between the inside edges of the running rails. Standard gauge is defined as 1,435 mm (4 ft 8+1⁄2 in), and narrow gauge as any gauge less than that distance.

In Britain, standard gauge is used for all main line routes and the majority of urban light rail. Narrow gauge railways were constructed mainly where there was a need for tighter curves, smaller structure gauges, and lighter rails, as they could be less costly to build, equip and operate than standard gauge railways (particularly in mountainous or difficult terrain).^[1]

Narrow gauge railways in Britain used various gauges. 2 ft 3 in (686 mm) was relatively uncommon; in his book Railway Adventure, L. T. C. Rolt states that apart from the Talyllyn, the only public railways to use the gauge were the Corris and Campbeltown and Machrihanish railways.^[2][a] However there were several private railways, including mine and quarry railways, which used the gauge.

Cite error: There are <ref group=lower-alpha> tags or {{efn}} templates on this page, but the references will not show without a {{reflist|group=lower-alpha}} template or {{notelist}} template (see the help page).