Mazda F engine

Mazda F engine
Carburetted 8-valve FE engine in a 1983 626 GC
Overview
ManufacturerMazda
Production1977–2002
Layout
ConfigurationInline-4
Displacement1.8 L (1,769 cc)
1.8 L (1,789 cc)
1.8 L (1,839 cc)
2.0 L (1,970 cc)
2.0 L (1,991 cc)
2.0 L (1,998 cc)
2.2 L (2,184 cc)
Cylinder bore80 mm (3.15 in)
81 mm (3.19 in)
83 mm (3.27 in)
86 mm (3.39 in)
Piston stroke77 mm (3.03 in)
85 mm (3.35 in)
86 mm (3.39 in)
88 mm (3.46 in)
92 mm (3.62 in)
98 mm (3.86 in)
Cylinder block materialCast iron
Cylinder head materialAlloy
ValvetrainSOHC 2 & 3 valves x cyl.
DOHC 4 valves x cyl.
Compression ratio7.8:1, 8.6:1, 9.1:1, 9.2:1, 9.7:1, 10.0:1
Combustion
TurbochargerIHI RHB5 VJ11 with air-to-air intercooler (some versions)
Fuel systemCarburetor, Fuel injection
Fuel typeGasoline
Cooling systemWater cooled
Output
Power output73–170 PS (54–125 kW; 72–168 hp)
Torque output89–190 lb⋅ft (121–258 N⋅m)

The F engine family from Mazda is a mid-sized inline-four piston engine with iron block, alloy head and belt-driven SOHC and DOHC configurations. Introduced in 1983 as the 1.6-litre F6, this engine was found in the Mazda B-Series truck and Mazda G platform models such as Mazda 626/Capella as well as many other models internationally including Mazda Bongo and Ford Freda clone, Mazda B-series based Ford Courier, Mazda 929 HC and the GD platform-based Ford Probe

There were four basic head types within the F range, the diesel SOHC 8-valve (R-series), the petrol SOHC 8-valve, petrol SOHC 12-valve, and the petrol DOHC 16-valve. These heads came attached to multiple variations of the different blocks and strokes. Only the petrol 8-valve and 12-valve shared the same gasket pattern. It was built at the Miyoshi Plant in Miyoshi, Hiroshima, Japan.


© MMXXIII Rich X Search. We shall prevail. All rights reserved. Rich X Search