Union Pacific Big Boy

Union Pacific Big Boy
Union Pacific 4014 sits in Pine Bluffs, Wyoming during a servicing stop on July 3, 2023
Type and origin
Reference:[1]
Power typeSteam
DesignerOtto Jabelmann
BuilderAmerican Locomotive Company (ALCO)
Build date1941 and 1944
Total produced25
Specifications
Configuration:
 • Whyte4-8-8-4
 • UIC(2′D)D2′ h4g
Gauge4 ft 8+12 in (1,435 mm) standard gauge
Leading dia.36 in (914 mm)
Driver dia.68 in (1,727 mm)
Trailing dia.42 in (1,067 mm)
Minimum curve288 ft (88 m) radius/ 20°
Wheelbase
  • Locomotive: 72 ft 5+12 in (22.09 m)
  • Overall: 117 ft 7 in (35.84 m)
LengthLocomotive: 85 ft 3+25 in (25.99 m)
Overall: 132 ft 9+14 in (40.47 m)
Width11 ft (3.35 m)
Height16 ft 2+12 in (4.94 m)
Axle load4884-1: 67,500 lb
4884-2: 68,150 lb
Adhesive weight4884-1: 540,000 lb
4884-2: 545,200 lb
Loco weight4884-1: 762,000 lb
4884-2: 772,250 lb
Tender weight4884-1: 427,500 lb
4884-2: 436,500 lb
Total weight4884-1: 1,189,500 lb
4884-2: 1,208,750 lb
Fuel typeCoal (No. 4014 converted to No. 5 fuel oil)
Fuel capacity28 short tons
(25.4 t; 25.0 long tons)
Water cap.4884-1: 24,000 US gal
4884-2: 25,000 US gal
Fuel consumptionUp to 11 short tons of coal / hr
Up to 12,000 US gal of water / hr
Firebox:
 • Grate area150 sq ft (14 m2)
Boiler107 in (2,718 mm) (OD)
Boiler pressure300 lbf/in2 (2.1 MPa)
Feedwater heaterElesco Type T.P. 502 Exhaust Steam Injector
14,000 US gal/hr capacity
Heating surface:
 • Firebox704 sq ft (65 m2) (4884-1)
720 sq ft (67 m2) (4884-2)
 • Tubes967 sq ft (90 m2) (4884-1)
2,734 sq ft (254 m2) (4884-2)
 • Flues4,218 sq ft (392 m2) (4884-1)
2,301 sq ft (214 m2) (4884-2)
 • Tubes and flues5,185 sq ft (482 m2) (4884-1)
5,035 sq ft (468 m2) (4884-2)
 • Total surface5,889 sq ft (547 m2) (4884-1)
5,735 sq ft (533 m2) (4884-2)
Superheater:
 • TypeType E (4884-1)
Type A (4884-2)
 • Heating area2,466 sq ft (229 m2) (Type E)
2,043 sq ft (190 m2) (Type A)
Cylinders4
Cylinder size23.75 in × 32 in
(603 mm × 813 mm)
Valve gearWalschaerts
Valve typePiston valves
Valve travel7 in (178 mm)
Valve lap1+38 in (35 mm)
Valve lead14 in (6 mm)
Train heatingSteam heat
Loco brakePneumatic, Schedule 8-ET
Train brakesPneumatic
Safety systemsCab signals
Performance figures
Maximum speed60 mph (97 km/h)
Power output6,290–7,000 hp (4,690–5,220 kW) @ 41 mph (66 km/h) (drawbar)
Tractive effort135,375 lbf (602.18 kN)
Factor of adh.3.99 (4884-1)
4.02 (4884-2)
Career
OperatorsUnion Pacific Railroad
Class4884-1, 4884-2
Numbers4000-4019 (4884-1)
4020-4024 (4884-2)
Last runJune 21, 1959 (revenue service)
Retired1959–1962
PreservedSeven on static display and one (No. 4014) operational in excursion service
RestoredNo. 4014; May 1, 2019
DispositionEight preserved, remainder scrapped
Cost to build US$ 265,000 in 1941, equivalent to $5,489,457 in 2023

The Union Pacific Big Boy is a type of simple articulated 4-8-8-4 steam locomotive manufactured by the American Locomotive Company (ALCO) between 1941 and 1944 and operated by the Union Pacific Railroad in revenue service until 1962.

The 25 Big Boy locomotives were built to haul freight over the Wasatch Range between Ogden, Utah, and Green River, Wyoming. In the late 1940s, they were reassigned to Cheyenne, Wyoming, where they hauled freight over Sherman Hill to Laramie, Wyoming. They were the only locomotives to use a 4-8-8-4 wheel arrangement: four-wheel leading truck for stability entering curves, two sets of eight driving wheels and a four-wheel trailing truck to support the large firebox.

Today, eight Big Boys survive, with most on static display at museums across the United States. One of them, No. 4014, was re-acquired by Union Pacific, and between 2014 and 2019 was rebuilt to operating condition for the 150th anniversary of the first transcontinental railroad. It thus regained the title as the largest and most powerful operating steam locomotive in the world.

  1. ^ Peck, Combes & Augur 1950, pp. 501, 519, 523, 545.

© MMXXIII Rich X Search. We shall prevail. All rights reserved. Rich X Search