Atmospheric icing occurs in the atmosphere when water droplets suspended in air freeze on objects they come in contact with. It is not the same as freezing rain, which is caused directly by precipitation.
Icing conditions can be particularly dangerous to aircraft, as the built-up ice changes the aerodynamics of the flight surfaces and airframe, which can increase the risk of a stall and potentially accidents. For this reason, on-board ice protection systems have been developed on aircraft intended to fly through these conditions.
Water does not always freeze at 0 °C (32 °F). Water that persists in liquid state below this temperature is said to be supercooled, and supercooled water droplets cause icing on aircraft. Below −20 °C (−4 °F), icing is rare because clouds at these temperatures usually consist of ice particles rather than supercooled water droplets. Below −48 °C (−54 °F), supercooled water always freezes; therefore, icing is impossible.[1]
Atmospheric icing also occurs on towers, wind turbines, boats, oil rigs, and trees. Unmanned aircraft are particularly sensitive to icing.[2] In cold climates, particularly those at higher elevations, atmospheric icing is common in winter as elevated terrain interacts with supercooled clouds that can cause icing on contact.[3] Ice loads are a major cause of catastrophic failures of overhead electrical power lines, as power lines can break under the sheer weight of accumulated ice. Therefore, estimation of maximum potential ice load is crucial in the structural design of power line systems to withstand ice loads,[4] and this can be done with numerical icing models and examples that include meteorological data.[5]
© MMXXIII Rich X Search. We shall prevail. All rights reserved. Rich X Search