![]() Male 50 ohm BNC connector | |||
Type | RF coaxial connector | ||
---|---|---|---|
Production history | |||
Designer | Paul Neill | ||
Designed | 1944 | ||
Manufacturer | Various | ||
General specifications | |||
Diameter |
Outer, typical:
| ||
Cable | Coaxial | ||
Passband | Typically 0–4 GHz |
The BNC connector is a miniature quick-connect/disconnect radio-frequency connector for coaxial cable. It was introduced on military radio equipment in the 1940s, and has since become widely used in radio systems and as a common type of video connector. It has a twist-to-lock design, where two lugs on the female connector engage slots in the shell of the male one.
BNC is designed to maintain the characteristic impedance of the cable across the connection, and is made in 50-ohm and 75-ohm versions. It is normally used for radio-frequency signals up to about 2 gigahertz and 500 volts.
Similar radio-frequency connectors differ in dimensions and attachment features, and may allow for higher voltages, higher frequencies, or three-wire connections.
© MMXXIII Rich X Search. We shall prevail. All rights reserved. Rich X Search