This article needs additional citations for verification. (May 2011) |
In firearms, headspace is the distance measured from a closed chamber's breech face to the chamber feature that limits the insertion depth of a cartridge placed in it. Used as a verb by firearms designers, headspacing refers to the act of stopping deeper cartridge insertion. The exact part of the cartridge that seats against the limiting chamber feature differs among cartridge and gun designs.[1] In general, bottleneck rifle cartridges headspace on their case shoulders; rimmed cartridges headspace on the forward surfaces of their case rims; and rimless pistol cartridges headspace on their case mouths. The case belts on belted cartridges were originally added to allow headspacing on the belt's forward surface, But in practice, this is often vestigial, and rifles chambered for belted cartridges may well headspace them on their shoulders and still be within CIP or SAAMI dimensional limits. However, belted cartridges and their corresponding chambers at their nominal CIP or SAAMI dimensions (maximum cartridge in minimum chamber) will headspace on the belt.
When the headspace is larger than the cartridge case, there is front-to-back cartridge wiggle room when the breech of the gun is closed. This extra space is called head clearance. Many, including some major manufacturers, confuse head clearance with headspace in their literature. This commonplace error is explained in the glossary of firearms terms maintained by the Sporting Arms and Ammunition Manufacturers' Institute (SAAMI), which is the ASTM standards organization for the U.S. firearms and ammunition industry. Excessive head clearance is undesirable for several reasons. It can allow a cartridge to slide forward beyond the distance within which the firing pin has the ability to adequately indent the primer for reliable ignition (though extractor hooks may act as the replacement headspace determinant in this situation). In chamber designs that don't fully support the case head, excess headspace can allow a case to expand excessively, which can thin or crack open the brass. Thus, the cartridge can rupture rearward, which releases hot gases under high pressure that can damage the firearm and injure or even kill the shooter or bystanders.[1]
If a chamber's headspace is too short, the gun may be unable to go fully into battery (close and lock completely), preventing firing.
© MMXXIII Rich X Search. We shall prevail. All rights reserved. Rich X Search