 | Parts of this article (those related to Failure threat section and Upgrades section) need to be updated. (May 2019) |
| Prado Dam | |
|---|---|
 Prado Dam above the Chino Valley Freeway (SR 71)/Riverside Freeway (SR 91) interchange | |
| Location | Riverside County, California |
| Coordinates | 33°53′25″N 117°38′27″W / 33.8902°N 117.6408°W |
| Opening date | April 1941 |
| Owner(s) |  U.S. Army Corps of Engineers |
| Dam and spillways | |
| Type of dam | Earth-fill dam |
| Impounds | Santa Ana River |
| Height | 162 ft (49 m) |
| Length | 2,280 ft (690 m) |
| Width (crest) | 30 ft (9.1 m) |
| Dam volume | 3,389,000 cu yd (2,591,000 m3) |
| Reservoir | |
| Creates | Prado Flood Control Basin |
| Total capacity | 314,400 acre⋅ft (387,800 dam3) |
| Catchment area | 2,230 sq mi (5,800 km2) |
| Surface area | 6,600 acres (2,700 ha) |
| U.S. Geological Survey Geographic Names Information System: Prado Dam | |
Prado Dam is an earth-fill dry dam across the Santa Ana River at the Chino Hills near Corona, California in Riverside County with the resulting impounded water creating Prado Flood Control Basin reservoir. The U.S. Army Corps of Engineers built the dam in Lower Santa Ana River Canyon. Its primary purpose is flood control and it is the downstream element of the Santa Ana River's flood control system, which is a natural constriction about 30.5 mi (49.1 km) upstream from the ocean. The area upstream from the dam contains 2,255 sq mi (5,840 km2) of the watershed's 2,650 sq mi (6,900 km2). The dam's construction was authorized in 1936 and the flood of 1938 demonstrated its necessity. Construction was completed in 1941. Prado Flood Control Basin also provides water storage for groundwater recharge operations.
© MMXXIII Rich X Search. We shall prevail. All rights reserved. Rich X Search