Test method

A test method is a method for a test in science or engineering, such as a physical test, chemical test, or statistical test. It is a definitive procedure that produces a test result.^[1] In order to ensure accurate and relevant test results, a test method should be "explicit, unambiguous, and experimentally feasible.",^[2] as well as effective^[3] and reproducible.^[4]

A test can be considered an observation or experiment that determines one or more characteristics of a given sample, product, process, or service. The purpose of testing involves a prior determination of expected observation and a comparison of that expectation to what one actually observes.^[5] The results of testing can be qualitative (yes/no), quantitative (a measured value), or categorical and can be derived from personal observation or the output of a precision measuring instrument.

Usually the test result is the dependent variable, the measured response based on the particular conditions of the test or the level of the independent variable. Some tests, however, may involve changing the independent variable to determine the level at which a certain response occurs: in this case, the test result is the independent variable.

^ "Form and Style for ASTM Standards". ASTM International. October 2017. Retrieved 8 February 2018.
^ Committee E-11 on Quality Control of Materials (1963). ASTM Manual for Conducting an Interlaboratory Study of a Test Method. American Society for Testing and Materials. p. 3. Retrieved 8 February 2018.{{cite book}}: CS1 maint: numeric names: authors list (link)
^ Nigh, P.; Gattiker, A. (2000). "Test method evaluation experiments and data". Proceedings International Test Conference 2000 (IEEE Cat. No.00CH37159). Vol. 2000. pp. 454–463. doi:10.1109/TEST.2000.894237. ISBN 978-0-7803-6546-9. S2CID 41043200.
^ Bridwell, H.; Dhingra, V.; Peckman, D.; et al. (2010). "Perspectives on Method Validation: Importance of Adequate Method Validation". The Quality Assurance Journal. 13 (3–4): 72–77. doi:10.1002/qaj.473.
^ "Glossary: S–Z". Understanding Science. University of California Museum of Paleontology. Retrieved 8 February 2018.

[ASTMForm17-1] "Form and Style for ASTM Standards". ASTM International. October 2017. Retrieved 8 February 2018.

[ASTM335_63-2] Committee E-11 on Quality Control of Materials (1963). ASTM Manual for Conducting an Interlaboratory Study of a Test Method. American Society for Testing and Materials. p. 3. Retrieved 8 February 2018.{{cite book}}: CS1 maint: numeric names: authors list (link)

[NighTest00-3] Nigh, P.; Gattiker, A. (2000). "Test method evaluation experiments and data". Proceedings International Test Conference 2000 (IEEE Cat. No.00CH37159). Vol. 2000. pp. 454–463. doi:10.1109/TEST.2000.894237. ISBN 978-0-7803-6546-9. S2CID 41043200.

[BridwellPerspectives10-4] Bridwell, H.; Dhingra, V.; Peckman, D.; et al. (2010). "Perspectives on Method Validation: Importance of Adequate Method Validation". The Quality Assurance Journal. 13 (3–4): 72–77. doi:10.1002/qaj.473.

[UCMPGlossary-5] "Glossary: S–Z". Understanding Science. University of California Museum of Paleontology. Retrieved 8 February 2018.

[1]

[2]

[3]

[4]

[5]