DB13W3

DB13W3
Male 13W3 plug
Type Computer video connector
Superseded by Analog interfaces such as VGA and DVI-A and digital interfaces such as DVI-D, HDMI and DisplayPort
General specifications
Hot pluggable Yes
External Yes
Video signal Analogue RGB or monochrome
Pins 13
Pinout
Pin Sun[1] SGI/
DCC
[2]
Pin 1 Ground/
DDC-SCL
Monitor ID bit 3/
Data clock (SCL)
Pin 2 Vertical sync/
NC
Monitor ID bit 0/
Bi-directional data (SDA)
Pin 3 Sense #2/
NC
Composite sync/
Composite sync
Pin 4 Sense ground/
DDC ground
Horizontal drive/
Horizontal sync
Pin 5 Composite sync Vertical drive/
Vertical sync
Pin 6 Horizontal sync/
DDC-SDA
Monitor ID bit 1/
DDC (+5V input)
Pin 7 Ground/
VSYNC
Monitor ID bit 2/
DDC ground
Pin 8 Sense #1/
NC
Digital ground/
Ground
Pin 9 Sense #0 /NC Digital ground/
Ground
Pin 10 Composite ground Sync ground/
Ground
A1 Red Red
A2 Green
(gray for monochrome)
Green
(gray for monochrome)
A3 Blue Blue

DB13W3 (13W3) is a style of D-subminiature connector used for analog video interfaces. The 13 refers to the total number of pins, the W refers to workstation and the 3 refers to the number of high-frequency pins. The connector was something of a pseudo-standard for high-end graphical workstations from the early 1990s to the early 2000s.

  1. ^ Goldwasser, Sam (October 1999). "Monitor Repair: The Finale!". Electronics Now. 70 (10). Gernsback Publications: 6–10 – via ProQuest.
  2. ^ Moyer, Charmaine; Linda Rae Sande; Kwong Liew (1999) [1997]. Octane Workstation Owner's Guide (PDF). Silicon Graphics, Inc. pp. 309–310. Archived from the original (PDF) on June 2, 2012.

© MMXXIII Rich X Search. We shall prevail. All rights reserved. Rich X Search